Cisco Nexus 7000 Series Referentie - Pagina 16

Blader online of download pdf Referentie voor {categorie_naam} Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 34 pagina's. Switch chassis
Ook voor Cisco Nexus 7000 Series: Referentiehandleiding (2 pagina's), Handleiding voor installatie-instructies (39 pagina's), Installatiehandleiding (18 pagina's), configureren (8 pagina's), Configuratiehandleiding (28 pagina's), Snelstarthandleiding (10 pagina's), Snelstarthandleiding (29 pagina's), Handleiding vervangende instructies (14 pagina's), Handleiding vervangende instructies (21 pagina's), Handleiding installeren (16 pagina's), Handleiding voor probleemoplossing (10 pagina's)

poweroff

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m

poweroff

To power off a supervisor of a line card module in the Cisco NX-OS, use the poweroff command.

Syntax Description

module module-number Specifies an I/O module. The range is from 1 to 18.

xbar xbar-number

Defaults

None

Command Modes

Global configuration mode

Supported User Roles

network-admin

vdc-admin

Release

Command History

4.0(1)

Usage Guidelines

This command does not require a license.

Examples

This example shows how to take a supervisor module out of service:

switch# configure terminal

switch(config)# poweroff module 5

Related Commands

Command

out-of-service

reload module

Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x

HACR-6

poweroff {module module-number | xbar xbar-number}

Specifies a fabric module. The range is from 1 to 5.

Modification

This command was introduced.

Description

Shuts down a supervisor module in the Cisco NX-OS software.

Reloads a module in a device.

Cisco Nexus 7000 Series NX-OS High Availability Commands

OL-23374-01