Cisco Nexus 7000 Series configureren - Pagina 4

Blader online of download pdf configureren voor {categorie_naam} Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 8 pagina's. Switch chassis
Ook voor Cisco Nexus 7000 Series: Referentiehandleiding (2 pagina's), Handleiding voor installatie-instructies (39 pagina's), Referentie (34 pagina's), Installatiehandleiding (18 pagina's), Configuratiehandleiding (28 pagina's), Snelstarthandleiding (10 pagina's), Snelstarthandleiding (29 pagina's), Handleiding vervangende instructies (14 pagina's), Handleiding vervangende instructies (21 pagina's), Handleiding installeren (16 pagina's), Handleiding voor probleemoplossing (10 pagina's)

Pagina afdrukken
Cisco Nexus 7000 Series configureren

Configuring DNS Clients

Configuring DNS Clients
Configuring the DNS Client
Before You Begin
• Ensure that you have a domain name server on your network.
• Ensure that you are in the correct VDC (or use the switchto vdc command).
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 6.x
4
Command or Action
switch# configure terminal
switch(config)# ip host name
address1 [address2... address6]
switch(config)# ip
domain-name name [use-vrf
vrf-name]
switch(config)# ip dns
source-interface [loopback X
different interface]
switch(config)# ip domain-list
name [use-vrf vrf-name]
Purpose
Enters global configuration mode.
Defines up to six static hostname-to-address mappings in the
hostname cache. The address can be either an IPv4 address or an
IPv6 address.
(Optional)
Defines the default domain name that Cisco NX-OS uses to
complete unqualified host names. You can optionally define a
VRF that Cisco NX-OS uses to resolve this domain name if it
cannot be resolved in the VRF that you configured this domain
name under.
Cisco NX-OS appends the default domain name to any hostname
that does not contain a complete domain name before starting a
domain-name lookup.
use-vrf is used as a DNS query supposed to be sending on a
different VRF and listening for the reply on a different VRF.
Example: DNS query is sent over VRF RED while the response
should come on VRF Default.
Defines what will be the source IP for the DNS Query which will
be sent out. When DNS server tries to answer back, it will use the
Loopback0 as the destination and there should be a valid return
route.
(Optional)
Defines additional domain names that Cisco NX-OS can use to
complete unqualified hostnames. You can optionally define a VRF
that Cisco NX-OS uses to resolve these domain names if they
cannot be resolved in the VRF that you configured this domain
name under.
Cisco NX-OS uses each entry in the domain list to append that
domain name to any hostname that does not contain a complete
domain name before starting a domain-name lookup. Cisco NX-OS
Configuring DNS
OL-25777-03