Cisco Nexus 7000 Series Configuratiehandleiding - Pagina 15

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 28 pagina's. Switch chassis
Ook voor Cisco Nexus 7000 Series: Referentiehandleiding (2 pagina's), Handleiding voor installatie-instructies (39 pagina's), Referentie (34 pagina's), Installatiehandleiding (18 pagina's), configureren (8 pagina's), Snelstarthandleiding (10 pagina's), Snelstarthandleiding (29 pagina's), Handleiding vervangende instructies (14 pagina's), Handleiding vervangende instructies (21 pagina's), Handleiding installeren (16 pagina's), Handleiding voor probleemoplossing (10 pagina's)

Configuring the Catena Solution

Routed Mode

Figure 2: Routed Mode

enabled with bad traffic, and disabled.

Figure 2: Routed Mode

Configuring the Catena Solution

You can configure Cisco Nexus devices such that packets can be redirected through multiple devices using

Catena.

By default, Catena is disabled on the Cisco NX-OS device. You must explicitly enable Catena to configure

and verify the authentication commands.

Ensure that you have installed the enhanced Layer 2 package license.

Note

shows the traffic flow between appliances in the routed mode when Catena is enabled,

Cisco Nexus 7000 Series Switches Configuration Guide: The Catena Solution

Routed Mode