Cisco Nexus 7000 Series Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 10 pagina's. Switch chassis
Ook voor Cisco Nexus 7000 Series: Referentiehandleiding (2 pagina's), Handleiding voor installatie-instructies (39 pagina's), Referentie (34 pagina's), Installatiehandleiding (18 pagina's), configureren (8 pagina's), Configuratiehandleiding (28 pagina's), Snelstarthandleiding (29 pagina's), Handleiding vervangende instructies (14 pagina's), Handleiding vervangende instructies (21 pagina's), Handleiding installeren (16 pagina's), Handleiding voor probleemoplossing (10 pagina's)

Figure 3

1 On the second memory slot on the

Rotate both ejector levers away from the front of the I/O module.

Step 13

If the I/O module had a metal cover, as shown in

Step 14

to the back of the I/O module by screwing in all the 14 screws before proceeding

to the next step.

Grasp the front of the module with one hand and place your other hand under the

Step 15

module to support its weight.

78-100406-01

Adding a DIMM

front of the I/O module, rotate both

spring clips out.

Replacing Memory on a Cisco Nexus 7000 Series I/O Module

Replacing a DIMM on an I/O Module

Holding the DIMM by its edges,

align it to the second memory slot

and push it into place until the

spring clips click into the DIMM.

Figure

1, secure the metal cover