Cisco Profile Series Installatiehandleiding - Pagina 34

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco Profile Series. Cisco Profile Series 44 pagina's. Jbod on the 12g sas modular raid controller
Ook voor Cisco Profile Series: Aan de slag handleiding (41 pagina's), Gebruikershandleiding (44 pagina's), Gebruikershandleiding (7 pagina's), Aan de slag handleiding (35 pagina's), Snelle referentiehandleiding (2 pagina's), Configuratiehandleiding (13 pagina's), Installatieblad (2 pagina's), Installatiehandleiding (2 pagina's), Snelstarthandleiding (4 pagina's), Snelstarthandleiding (4 pagina's), Handleiding installeren (16 pagina's), Aan de slag handleiding (32 pagina's), Handmatig (16 pagina's), Aan de slag handleiding (42 pagina's), Aan de slag handleiding (46 pagina's)

Turn on the Ethernet switch.

Step 3

Connecting a Terminal or PC to the Console Port

Connect a terminal or PC to the Console port either to configure the software by using the CLI or to

troubleshoot problems with the router.

To connect a terminal or PC to the console port on the router and access the CLI, follow these steps:

Connect the RJ-45 end of a DB-9-to-RJ-45 serial cable to the RJ-45 Console port on the router.

Step 1

The connections remain the same for a 4 port module.

Note

Figure 3-3

Connect the DB-9 end of the DB-9-to-RJ-45 serial cable to the COM port on your laptop or PC.

Step 2

Note

To communicate with the router, start a terminal emulator application.

Step 3

Cisco 800M Series Integrated Services Router Hardware Installation Guide

3-4

shows the RJ-45 end of the serial cable connected to the Console port on the router.

Connecting a Terminal or PC to the Console Port

RJ-45 connector to the Console port on

the router

Some laptops and PCs do not come with DB-9 serial port connectors and may require a

USB-to-serial port adapter.

Chapter 3

DB-9 connector

Connecting the Router