B2 Audio M1u Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} B2 Audio M1u. B2 Audio M1u 9 pagina's. B2 audio class d mono amplifier
Ook voor B2 Audio M1u: Gebruikershandleiding (10 pagina's)

Pagina afdrukken

2. Panel layout

M1u

GND (GROUND CONNECTION)

For connection to the chassis' ground.

For optimum performance 0 gauge cable is

required, all of them using common ground

connected with cable of equal length.

REM (REMOTE)

Connect to switched +12V from the head unit.

Installation of the amplifier should be done in the folling steps:

1. Ensure that the ground is appropriate, then connect it to the amplifier.

2. Next step is to connect the +12V wire. Ensure all power terminals are used.

This cable has to be fused at the battery & the amplifier for safety precautions.

3. The final step is connecting the switched remote.

4. Operation over 16V will cause the amplifier to go into protect mode.

+12V (POWER CONNECTION)

For connection to the positive terminal

of the battery (+12V).

For optimum performance 0 gauge cable

is required.

CAUTION