Cisco S195 Aan de slag handleiding - Pagina 11

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Cisco S195. Cisco S195 18 pagina's. Web security appliance
Ook voor Cisco S195: Handmatig (24 pagina's), Hardware installatiehandleiding (50 pagina's)

Pagina afdrukken

Management port (M1) - (192.168.42.42)

Traffic monitor port (T1)

Internet

Power up the appliance by pressing the On/Off switch on the front panel of the appliance. You must

Step 5

wait 10 minutes for the system to initialize each time you power up the system. After the appliance

powers up, a solid green light on the front panel indicates that the appliance is operational.

Wait at least 10 minutes for the system to complete the power up sequence and the LEDs to turn green.

Caution

If you turn the power off before the initialization is complete, the appliance will not reach an operational

state and must be returned to Cisco.

If turned on quickly after connecting power to the appliance, the appliance powers up, the fans spin and

Note

the LEDs turn on. Within 30-60 seconds, the fans stop and all LEDs turn off. The appliance powers on

31 seconds later. This behavior is by design to allow the system firmware and controller to synchronize.

See the

AsyncOS for Cisco Web Security Appliances User Guide

Step 6

Cisco Web Security Appliance S195, S395, S695, and S695F Getting Started Guide

Connect to the Appliance

Management computer (192.168.42.43)

WAN modem

for further configuration.