Cisco S695F Hardware installatiehandleiding - Pagina 19
Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco S695F. Cisco S695F 50 pagina's. Web security appliance
Ook voor Cisco S695F: Aan de slag handleiding (18 pagina's), Handmatig (24 pagina's)
Pagina afdrukken
Overview
7
9
11
13
15
Rear Panel LEDs
The following figure shows the rear panel LEDs of the WSA S195 and describes their states. The S395 is the
same except it has two power supplies. The S695 and S695F have the same LEDs except that these models
have more data interfaces; the speed and status LED descriptions are the same.
Figure 13: S195 and S395 Rear Panel LEDs and Their States
1
3
Threaded holes for dual-hole grounding lug
Use is optional. The supported AC power supplies
have internal grounding, so no additional chassis
grounding is required.
Management interface 1 (MGMT 1)
Restricted to management use only
USB 3.0 Type A (USB 2)
Data interface (DATA 2)
Serial console port (
RJ-45 connector that directly connects a
management computer to the appliance.
Interface link speed:
• Off—Link speed is 100 Mbps.
• Amber—Link speed is 1 Gbps.
• Green—Link speed is 10 Gbps.
Data interface link speed:
• Off—Link speed is 10 Mbps.
• Amber—Link speed is 100 Mbps.
• Green—Link speed is 1 Gbps.
Cisco Web Security Appliance S195, S395, S695, and S695F Hardware Installation Guide
8
Management interface 2 (MGMT 2)
Not supported
10
USB 3.0 Type A (USB 1)
12
Data interface (DATA 1)
RPC port (RPC)
14
Use for remote power cycling.
16
Unit identification button
2
Interface link status:
• Off—No link is present.
• Green—Link is active.
• Green, flashing—Traffic is present on the
active link.
4
Data interface link status:
• Off—No link is present.
• Green—Link is active.
• Green, flashing—Traffic is present on the
active link.
Rear Panel LEDs
15