Cisco SCE8000 GBE Procedures voor verwijdering en vervanging - Pagina 2
Blader online of download pdf Procedures voor verwijdering en vervanging voor {categorie_naam} Cisco SCE8000 GBE. Cisco SCE8000 GBE 36 pagina's. 10gbe platform
Ook voor Cisco SCE8000 GBE: Snelstarthandleiding (25 pagina's), Configuratiehandleiding (18 pagina's), Installing (21 pagina's)
Pagina afdrukken
Safety
Safety
Class 1 laser product.
Warning
Statement 1008
Because invisible laser radiation may be emitted from the aperture of the port when no cable is
Warning
connected, avoid exposure to laser radiation and do not stare into open apertures.
Statement 1056
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available.
Statement 1024
Warning
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
when servicing.
Statement 1034
Before working on a chassis or working near power supplies, unplug the power cord on AC units;
Caution
disconnect the power at the circuit breaker on DC units.
The plug-socket combination must be accessible at all times because it serves as the main disconnecting
Note
device.
Cisco SCE8000 10GBE Installation and Configuration Guide
9-2
Chapter 9 Removal and Replacement Procedures
OL-26784-02