Cisco SCE8000 GBE Installing - Pagina 14

Blader online of download pdf Installing voor {categorie_naam} Cisco SCE8000 GBE. Cisco SCE8000 GBE 21 pagina's. 10gbe platform
Ook voor Cisco SCE8000 GBE: Snelstarthandleiding (25 pagina's), Configuratiehandleiding (18 pagina's), Procedures voor verwijdering en vervanging (36 pagina's)

Installing the Cisco SCE8000 Chassis in the Rack

This section describes how to install a Cisco SCE8000 platform in a rack. For first-time installations,

perform the procedures in the following sections in the order listed:

•

Before starting the installation procedures in this chapter, see the

Note

page 4-12 to verify that all site planning activities were completed.

Tip

Do not discard the shipping container when you unpack the Cisco SCE8000. Flatten the shipping cartons

and store them with the pallet. You need these containers to move or ship the Cisco SCE8000.

Perform the following to check the contents of the shipping container:

•

Cisco SCE8000 10GBE Installation and Configuration Guide

4-14

Unpacking the Cisco SCE8000 Chassis, page 4-14

Installation Guidelines, page 4-15

Required Tools, page 4-15

Installing the Chassis Brackets, page 4-16

Installing the Chassis in the Rack, page 4-16

Installing an Optical Bypass Module, page 4-18

Check the contents of the accessories kit against the list of accessories in the

Component and Accessory

all listed equipment, which should include the following:

Hardware and software documentation, if ordered

–

Optional equipment that you ordered, such as network interface cables, transceivers, or special

–

connectors

Check the modules in each slot. Ensure that the configuration matches the packing list and that all

the specified interfaces are included.

Lists" section on page 2-13 and the packing slip. Verify that you received

Chapter 4 Installing the Cisco SCE8000 Chassis

"Site Planning

Checklist" section on

"Cisco SCE8000

OL-21054-04