Epson ES-300C Product ondersteunings bulletin - Pagina 13

Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson ES-300C. Epson ES-300C 20 pagina's. Laser & non-impact printer error codes
Ook voor Epson ES-300C: Product ondersteunings bulletin (19 pagina's), Handmatig (8 pagina's), Aanvullende handleiding (15 pagina's), Handmatig (11 pagina's), Product ondersteunings bulletin (14 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (13 pagina's)

Whenever a paper jam occurs you must remove the processing tray (which includes

the Developer Unit and the Drum Unit). Do not remove the jammed paper by pulling

the paper to the right (toward the paper supply tray) as this could break the Transfer

Charger wire.

The proper method of removing a paper jam is to first insure that the paper is not

wrapped around the Transfer Charger wire. If it is, carefully pull the paper away from

the wire area as shown below.

Pull 1st

Once the paper is clear of the wire, the paper can then be pulled to the right and out

of the printer. Replace the processing tray and close the printer cover.

Breakage of the Transfer Charger wire will cause a change in the print quality. The

toner will not be completely transferred to the paper and the print will be light or

inconsistent in darkness.

If the Transfer Charger wire is broken, the Transfer Unit must be replaced. The part

number is HGMBK-04601.

PSB No: P-0074

Page: 2 of 2