Cisco TelePresenceMCU 5300 Series Aan de slag - Pagina 13
Blader online of download pdf Aan de slag voor {categorie_naam} Cisco TelePresenceMCU 5300 Series. Cisco TelePresenceMCU 5300 Series 20 pagina's. Multipoint control units
Pagina afdrukken
3
In the
Clustering configuration
menu.
4
Click
Apply changes
5
Click
to restart the MCU and apply the changes.
OK
6
Go to
Status > Cluster
as the slave.
When you have configured the units as master and slave, do not use the web interface
of the slave unit for normal operations. All statistics and configuration information
for the cluster can be accessed via the web interface of the master unit. The slave web
interface is only used for upgrading code and for network configuration.
section, select
.
to confirm that the MCU has been correctly configured
Clustering MCUs
from the drop down
Slave
13