Cisco UCS Gebruikershandleiding - Pagina 26

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco UCS. Cisco UCS 50 pagina's. C-series

ESXi Install

The OS Install page of the selected ESXi version appears.

Basic Configuration

To configure the basic configuration settings, follow these steps:

Step 1

In the Basic Configuration area, do the following:

Note

•

Parameter

iSCSI Target Address field

Interface Name drop-down list

Initiator IP address field

Subnet Mask field

Gateway IP field

Cisco UCS Server Configuration Utility, Release 5.0

6-2

In the Root Password field, enter the root password.

In the Confirm Root Password field, reenter the root password.

From the Media Type drop-down list, choose the disk on which you want install OS. This can be

one of the following:

A disk that is detected during SCU boot is listed under Media Type.

Local Disk—Refers to the local HDD available on the target server.

SAN Disk—Following SAN disks are supported for ESXi installation:

–

Remote Disk—Refers to the SAN based FCoE disk allocated on the target server.

–

iSCSI Disk—This refers to SAN based iSCSI disks configured on the target server. If you

choose this option, then review and update the following parameters:

Table 6-1

iSCSI parameters

Description

Supports IPv4 address only.

Lists the interfaces that have iSCSI enabled.

You must choose the interface with which the

iSCSI Target can be reached. As a pre-requisite

the selected interface's option ROM must be

pre-configured with iSCSI details.

Enter Initiator IP Address.

This IP address is bound to the selected Interface

and used for iSCSI operations

Subnet mask for the Initiator IP.

Gateway IP address.

Chapter 6

Installing Operating Systems