Cisco UCS 5100 Configuratie - Pagina 3

Blader online of download pdf Configuratie voor {categorie_naam} Cisco UCS 5100. Cisco UCS 5100 5 pagina's. Uplink ethernet connection
Ook voor Cisco UCS 5100: Setup (4 pagina's), Setup (17 pagina's), Firmware handleiding (10 pagina's), Handmatig (14 pagina's), Upgrade-instructies (10 pagina's), Snelstarthandleiding (8 pagina's), Configuratiehandleiding (6 pagina's)

Pagina afdrukken
Cisco UCS 5100 Configuratie
4.
Enter the appropriate information in order to create the block of IP addresses, and then click OK.
Note: The IP addresses in the block must be routable outside.
UCS Manager CLI
Complete these steps in order to use the UCS CLI to configure KVM console access to the blade server:
1.
Enter org mode.
2.
Enter ip−pool and then ext−mgmt mode.
3.
Enter the pool ip address block.
4.
Commit transaction.
Power−A#
Power−A#
Power−A#scope org
Power−A /org #scope ip−pool ext−mgmt
Power−A /org/ip−pool #scope pooled 10.193.35.200
Power−A