Cisco UCS B200 M4 Installatie en onderhoud - Pagina 19
Blader online of download pdf Installatie en onderhoud voor {categorie_naam} Cisco UCS B200 M4. Cisco UCS B200 M4 30 pagina's. For e5-2600 v4 series cpus
Ook voor Cisco UCS B200 M4: Installatie en onderhoud (46 pagina's), Upgrade handleiding (9 pagina's), Onderhoudshandleiding (24 pagina's)
Pagina afdrukken
Step 2
Press gently on the top of the CPU carrier from the exterior side until it snaps into place.
Step 3
Close the socket latch.
Step 4
Hook the self-loading socket (SLS) lever .
Step 5
Hook the SLS lever
Step 6
Thermally bond the CPU and heat sink using the thermal grease provided.
Step 7
Replace the heat sink. The yellow CPU heat sink install guide pins that are attached to the motherboard must align with
the cutout on the heat sink to ensure proper installation of the heat sink.
Figure 14: Replacing the Heat Sink
Step 8
Tighten the four captive screws in the order shown.
Memory and Performance
Installing Memory
To install a DIMM into the blade server, follow these steps:
.
19