Cisco UCS B22 M3 Installatie en onderhoud - Pagina 9

Blader online of download pdf Installatie en onderhoud voor {categorie_naam} Cisco UCS B22 M3. Cisco UCS B22 M3 31 pagina's. Blade server
Ook voor Cisco UCS B22 M3: Upgrade handleiding (21 pagina's)

Pagina afdrukken

Cisco UCS B22 M3 Installatie en onderhoud

Procedure

Step 1

Grasp the front of the blade server and place your other hand under the blade to support it.

Figure 5: Positioning a Blade Server in the Chassis

Step 2

Open the ejector lever in the front of the blade server.

Step 3

Gently slide the blade into the opening until you cannot push it any farther.

Step 4

Press the ejector lever so that it catches the edge of the chassis and presses the blade server all the way in.

Step 5

Tighten the captive screw on the front of the blade to no more than 3 in-lbs. Tightening with bare fingers only is unlikely

to lead to stripped or damaged captive screws.

Step 6

Power on the server. UCS Manager automatically reacknowledges, reassociates, and recommissions the server, provided

any hardware changes are allowed by the service profile.