Cisco UCS B420 M3 Installatie en onderhoud - Pagina 32
Blader online of download pdf Installatie en onderhoud voor {categorie_naam} Cisco UCS B420 M3. Cisco UCS B420 M3 38 pagina's. High performance blade server
Ook voor Cisco UCS B420 M3: Upgrade handleiding (8 pagina's)
Pagina afdrukken
e) Continue with enabling TPM support in the server BIOS in the next step.
Figure 23: TPM Socket Location
1
Front of server
Step 2
Enable TPM Support in the BIOS.
a) Enable Quiet Mode in the BIOS policy of the server's service profile.
b) Establish a direct connection to the server, either by connecting a keyboard, monitor, and mouse to the front panel
using a KVM dongle (N20-BKVM) or by other means.
c) Reboot the server.
d) Press F2 during reboot to enter the BIOS setup screens.
e) On the Advanced tab, select Trusted Computing and press Enter to open the TPM Security Device Configuration
window.
f) Set the TPM Support option to Enabled.
g) Press F10 to save and exit. Allow the server to reboot, but watch for the prompt to press F2 in the next step.
Step 3
Enable TPM State in the BIOS.
a) Press F2 during reboot to enter the BIOS setup screens.
b) On the Advanced tab, select Trusted Computing and press Enter to open the TPM Security Device Configuration
window.
32
2
TPM socket on motherboard