Cisco UCS C240 M3 Upgrade handleiding - Pagina 4
Blader online of download pdf Upgrade handleiding voor {categorie_naam} Cisco UCS C240 M3. Cisco UCS C240 M3 10 pagina's. Nebs server
Ook voor Cisco UCS C240 M3: Configuratiehandleiding (33 pagina's), Service Opmerking (11 pagina's)
Pagina afdrukken
Upgrading Cisco UCS C-Series Servers to Intel E5-2600/E5-2400 v2 Series CPUs
Wait for Cisco UCS Manager to automatically discover and associate the server.
Step 7
Upgrade Scenario 2: Standalone Server
This scenario assumes the following conditions:
•
•
•
In this case, use the following procedure to upgrade the server and CPUs.
Use the Cisco Host Upgrade Utility (HUU) to upgrade and activate the server CIMC and BIOS to the
Step 1
minimum version for your server (or later).
Use the procedures in the
download and use the utility package.
Be sure to update the CIMC and BIOS when you select which components to update. The Cisco HUU
Caution
ensures that the firmware is matched. The server will not boot if the CIMC and BIOS become
mismatched.
Power off the server.
Step 2
Replace the CPUs with the Intel E5-2600/E5-2400 v2 Series CPUs.
Step 3
Use the CPU replacement procedures in the Installation and Service guide for your server:
C-Series Installation and Upgrade
Power on the server.
Step 4
Upgrade Scenario 3: Standalone Server; BIOS on Spare Server is Earlier Than the
Minimum Version
This scenario is unique to a field-service situation in which a server that is already running Intel
E5-2600/E5-2400 v2 Series CPUs must be replaced, but the only replacement server available is running
a BIOS earlier than the minimum version.
This scenario assumes the following conditions:
•
•
Cisco UCS C-Series Servers Upgrade Guide for Intel E5-2600 v2/E5-2400 v2 Series CPUs
4
The C-Series server is in standalone mode.
The C-Series server is at a BIOS/CIMC version earlier than the minimum (see
and Firmware Requirements, page
The C-Series server is using CPUs earlier than Intel E5-2600/E5-2400 v2 Series.
Cisco Host Upgrade Utility User Guide
The C-Series server is in standalone mode.
The replacement C-Series server is using Intel E5-2600/E5-2400 v2 Series CPUs (after the CPUs
are transferred from the old server).
2).
Guides.
Minimum Software
for your minimum release (or later) to
Cisco UCS
OL-28629-01