Cisco UCS Invicta C3124SA Installatiehandleiding - Pagina 15
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco UCS Invicta C3124SA. Cisco UCS Invicta C3124SA 40 pagina's.
Ook voor Cisco UCS Invicta C3124SA: Upgradeprocedure (16 pagina's), Upgradeprocedure (20 pagina's)
Pagina afdrukken
Chapter 1
Overview
Status LEDs and Buttons
This section describes the location and meaning of LEDs and buttons and includes the following topics
•
•
Front Panel LEDs
Figure 1-3
Figure 1-3
1
2
3
4
5
Table 1-2
Front Panel LEDs, Definitions of States
LED Name
Hard drive fault
Hard drive activity
OL-31369-01
Front Panel LEDs, page 1-3
Rear Panel LEDs and Buttons, page 1-5
shows the front panel LEDs.
Front Panel LEDs
Hard drive fault LED
Hard drive activity LED
Network link activity LED
Power supply status LED
Temperature status LED
State
•
Off—The hard drive is operating properly.
•
Amber—This hard drive has failed.
•
Amber, blinking—The device is rebuilding.
Off—There is no hard drive in the hard drive sled (no access, no fault).
•
Green—The hard drive is ready.
•
Green, blinking—The hard drive is reading or writing data.
•
Table 1-2
defines the LED states.
6
Fan status LED
7
System status LED
8
Identification button/LED
9
Power button/power status LED
–
Cisco UCS Invicta C3124SA Appliance Installation Guide
Status LEDs and Buttons
1-3