Cisco 1100 Series Hardware installatiehandleiding - Pagina 39
Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} Cisco 1100 Series. Cisco 1100 Series 44 pagina's. Terminal gateway
Ook voor Cisco 1100 Series: Installeren en upgraden (15 pagina's), Handmatig (12 pagina's)
Pagina afdrukken
Install and Connect the Router
3. Use a number 1 Phillips or flat-blade screwdriver to tighten the screws..
Connection Procedures and Precautions
After you have installed the router chassis, perform these steps to connect the WAN and LAN interfaces:
• Connect each WAN and LAN to the appropriate connector on the chassis.
• Position the cables carefully so that you do not strain the connectors.
• Organize cables in bundles so that cables do not intertwine.
• Inspect the cables to make sure that the routing and bend radius is satisfactory. If necessary, reposition
• Install cable ties in accordance with site requirements.
Configure the Router at Startup
After installing the router and connecting the cables, you can configure the router with basic configurations.
For more information on how to configure the router, see the
the cables.
Cisco 1100 Series Software Configuration
Hardware Installation Guide for the Cisco 1100 Terminal Gateway
Connection Procedures and Precautions
Guide.
35