Cisco 2600 Series Installatiehandleiding - Pagina 21

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco 2600 Series. Cisco 2600 Series 22 pagina's. Configuring adsl wic to support pppoe clients
Ook voor Cisco 2600 Series: Installatiehandleiding (12 pagina's), Release-opmerkingen (32 pagina's), Configuratie (15 pagina's), Toepassingsnotitie (41 pagina's), Gegevensblad (6 pagina's), Bijlage (15 pagina's), Overzicht (13 pagina's), Snelstarthandleiding (2 pagina's), Handmatig (5 pagina's)

Pagina afdrukken
Cisco 2600 Series Installatiehandleiding
Chapter 3
Installing the Router

Connecting to the Console Port

To connect a terminal (an ASCII terminal or a PC running terminal emulation software) to the console
port on the router:
Connect the terminal using the blue RJ-45-to-RJ-45 console cable and an RJ-45-to-DB-9 adapter
Step 1
(labeled TERMINAL) or the blue RJ-45-to-DB-9 adapter cable. (See
Figure 3-27 Connecting a Console Terminal
Configure your terminal or PC terminal emulation software for 9600 baud, 8 data bits, no parity, and
Step 2
2 stop bits.
For information on console port pinouts, refer to the online document Cisco Modular Access Router
Note
Cabling Specifications on Cisco.com and the Documentation CD-ROM that accompanied your
router.
OL-2171-02
SERIAL 1
SERIAL 0
CONN
WIC
CONN
2A/S
CONN
SEE MANUAL BEFORE INSTALLATION
SEE MANUAL BEFORE INSTALLATION
LINK
ETHERNE T 1
ACT
LINK
ETHERNE T 0 ACT
CONSOLE
Console port (RJ-45)
RJ-45 to RJ-45
rollover cable
RJ-45-to-DB-25 adapter
SERIAL 1
Cisco 2611
100-240V – 1A
50/60 Hz 47 W
SERIAL 0
WIC
CONN
2A/S
W0
AUX
Laptop computer
RJ-45 to DB-9 or
Cisco 2600 Series Routers Hardware Installation Guide
Connecting to a Network
Figure
3-27.)
3-21