Cisco AS5400XM Handleiding installeren - Pagina 10

Blader online of download pdf Handleiding installeren voor {categorie_naam} Cisco AS5400XM. Cisco AS5400XM 16 pagina's.

Connecting to the BITS Port

Configure your terminal or PC terminal emulation software for 9600 baud, 8 data bits, no parity, and

Step 2

2 stop bits. To configure the console port, see the Cisco AS5350XM and Cisco AS5400XM Universal

Gateways Software Configuration Guide.

Connecting a Modem to the Auxiliary Port

To connect a modem to the auxiliary port, follow these steps:

Connect a modem to the auxiliary port using an RJ-45 rollover cable with an RJ-45-to-DB-25 adapter.

Step 1

The adapter provided is labeled MODEM. (See

Figure 3-11

T1/E1 8 PRI

connector

Make sure that your modem and the auxiliary port on the Cisco AS5400XM universal gateway are

Step 2

configured for the same transmission speed (38400 baud is typical) and hardware flow control with Data

Carrier Detect (DCD) and Data Terminal Ready (DTR) operations.

Connecting to the BITS Port

Use a coaxial cable to connect a timing signal generator (TSG) to the BITS port. The BITS port is used

for external clocking. (See

Cisco AS5400XM Universal Gateway Chassis Installation Guide

3-10

Connecting a Modem to the Auxiliary Port

Auxiliary port

RJ-45-to-RJ-45

rollover cable

Figure

3-12.)

Chapter 3

Installing the Cisco AS5400XM Universal Gateway

Figure

3-11.)

(RJ-45)

RJ-45-to-DB-25 adapter

(labeled MODEM)

Modem

OL-6418-02