Digitus Biometrics db Nexus II Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Digitus Biometrics db Nexus II. Digitus Biometrics db Nexus II 20 pagina's.

Pagina afdrukken

•

A fail secure lock needs supplying with a 12V supply to open the lock.

•

Connect the Ground Lead of the lock to the terminal labeled 0V.

•

Connect the Live Lead of the lock to the terminal labeled Door Solenoid.

•

Connect a link between Link and NC and a link between COM and 12V

•

A fail-safe or magnetic lock is permanently supplied with a 24V supply to keep the lock closed. The Digitus

controller does not supply a 24V output. To use a 24V lock a separate power supply will be required. Wire a 24V

Fail Safe lock as shown in the diagram:

Models: db Nexus II, Nexus III

Fail Secure Locks (12V)

Fail Safe Locks and Magnetic Locks (24V)

Page 9 of 20

Digitus Biometrics, Inc. 2011