Cisco ATA 186 Overzicht handleiding

Blader online of download pdf Overzicht handleiding voor {categorie_naam} Cisco ATA 186. Cisco ATA 186 11 pagina's. Analog telephone adaptor
Ook voor Cisco ATA 186: Configuratie (28 pagina's), Gegevensblad (7 pagina's), Overzicht (11 pagina's), Configuratiehandleiding (8 pagina's), Gebruikershandleiding (12 pagina's), Installatie- en configuratiehandleiding (13 pagina's), Instructies voor installatie (6 pagina's), Configuratie (6 pagina's)

Cisco ATA 186 Overzicht handleiding
Cisco Analog Telephone Adaptor Overview
This section describes the hardware and software features of the Cisco Analog Telephone Adaptor
(Cisco ATA) and includes a brief overview of the Skinny Client Control Protocol (SCCP).
The Cisco ATA analog telephone adaptors are handset-to-Ethernet adaptors that allow regular analog
telephones to operate on IP-based telephony networks. Cisco ATAs support two voice ports, each with
an independent telephone number. The Cisco ATA 188 also has an RJ-45 10/100BASE-T data port.
This section covers the following topics:
Overview of the Skinny Client Control Protocol, page 1-2
Hardware Overview, page 1-3
Software Features, page 1-5
Installation and Configuration Overview, page 1-9
Figure 1-1
The Cisco ATA, which operates with Cisco voice-packet gateways, uses broadband pipes deployed
through digital subscriber line (DSL), fixed wireless, cable modem, and other Ethernet connections.
The term Cisco ATA refers to both the Cisco ATA 186 and the Cisco ATA 188, unless otherwise stated.
Note
Note
This guide provides information about the SCCP image for the Cisco ATA. The features and functionality
described in this guide do not necessarily pertain to the features and functionality provided by the other
protocol loads available for the Cisco ATA. Each protocol load has its own administrator's guide. If you are
looking for information about the behavior of the Cisco ATA for a protocol other than SCCP, please refer to
the administrator's guide specific to that protocol.
OL-4652-01
Cisco ATA Analog Telephone Adaptor
C IS C O A
T A 1 8 6
A N A L O G
T E L E PH
O N E A D
A PT O R
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for SCCP (version 3.0)
C H A P T E R
1
1-1