Cisco ATA 188 Configuratie - Pagina 12
Blader online of download pdf Configuratie voor {categorie_naam} Cisco ATA 188. Cisco ATA 188 28 pagina's. Analog telephone adaptor
Ook voor Cisco ATA 188: Overzicht (11 pagina's), Overzicht handleiding (11 pagina's), Instructies voor installatie (6 pagina's)
Pagina afdrukkenYou also need the following items:
•
Category-3 10BASE-T or 100BASE-T or better Ethernet
cable. One cable is needed for each Ethernet connection.
A Category-3 Ethernet cable supports 10BASE-T for up to
100 meters without quality degradation, and a Category-3
Ethernet cable supports 100BASE-T for up to 10 meters
without quality degradation.
For uplink connections, use a crossover Ethernet cable to
connect the Cisco ATA to another Ethernet device (such as a
router or PC) without using a hub. Otherwise, use
straight-through Ethernet cables for both uplink and data
port connections.
•
Access to an IP network
One or two analog Touch-Tone telephones or fax machines,
•
or one of each
12