Digitus professional DN-170090 Snelle installatiehandleiding - Pagina 9

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Digitus professional DN-170090. Digitus professional DN-170090 11 pagina's. Professional online 1000-3000 va ups system

Pagina afdrukken

UPS Turn on and Turn off

Start up operation

Turn on the UPS in line mode

1. Once mains power is plugged in, the UPS will charge the battery, at the moment, the LCD shows

that the output voltage is 0, which means the UPS has no output. If it is expected to have the

output of bypass, you can set the bps "ON" by LCD setting menu.

2. Press and hold the ON key for more than half a second to start the UPS; then it will start the

inverter.

3. Once started, the UPS will perform a self-test function; LED will light and go out circularly and

orderly. When the self-test finishes, it will come to line mode, the corresponding LED lights, the

UPS is working in line mode.

Turn on the UPS by DC without mains power

When mains power is disconnected, press and hold the ON key for more than half a second to

start UPS.

The operation of the UPS in the process of start is almost the same as that when mains power is

in. After finishing the self-test, the corresponding LED lights and the UPS are working in battery

mode.

Turn off operation

Turn off the UPS in line mode

1. Press and hold the OFF key for more than half a second to turn off the UPS and inverter.

2. After the UPS shutdown, the LEDs go out and there is no output. If output is needed, you can set

bps "ON" on the LCD setting menu.

Turn off the UPS by DC without mains power

1. Press and hold the OFF key for more than half a second to turn off the UPS.

2. When turning off the UPS, it will do self-testing firstly. The LEDs light and go out circularly and

orderly until there is no display on the cover.