Cisco Linksys WAG110 Gebruikershandleiding - Pagina 21

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cisco Linksys WAG110. Cisco Linksys WAG110 33 pagina's. Wireless adsl2+ gateway

Pagina afdrukken

Appendix D

National Restrictions

This product may be used in all EU countries (and other

countries following the EU directive 1999/5/EC) without

any limitation except for the countries mentioned below:

Ce produit peut être utilisé dans tous les pays de l'UE (et dans

tous les pays ayant transposés la directive 1999/5/CE) sans

aucune limitation, excepté pour les pays mentionnés ci-

dessous:

Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti

gli altri paesi che seguono le direttive EU 1999/5/EC) senza

nessuna limitazione, eccetto per i paesii menzionati di

seguito:

Das Produkt kann in allen EU Staaten ohne Einschränkungen

eingesetzt werden (sowie in anderen Staaten die der EU

Direktive 1999/5/CE folgen) mit Außnahme der folgenden

aufgeführten Staaten:

In the majority of the EU and other European countries,

the 2,4- and 5-GHz bands have been made available

for the use of wireless local area networks (LANs). The

table labeled "Overview of Regulatory Requirements for

Wireless LANs" provides an overview of the regulatory

requirements applicable for the 2,4- and 5-GHz bands.

Later in this document you will find an overview of

countries in which additional restrictions or requirements

or both are applicable.

The requirements for any country may evolve. Linksys

recommends that you check with the local authorities for

the latest status of their national regulations for both the

2,4- and 5-GHz wireless LANs.

Overview of Regulatory Requirements for Wireless LANs

Frequency

Max Power Level

Band (MHz)

(EIRP) (mW)

2400-2483.5

100

5150-5350

200

†

5470-5725

1000

†

Dynamic Frequency Selection and Transmit Power Control are

†

required in the frequency ranges of 5250-5350 MHz and 5470-5725

MHz.

The following countries have restrictions and/or

requirements in addition to those given in the table

labeled "Overview of Regulatory Requirements for

Wireless LANs":

Denmark

In Denmark, the band 5150 - 5350 MHz is also allowed for

outdoor usage.

I Danmark må frekvensbåndet 5150 - 5350 også anvendes

udendørs.

Wireless ADSL2+ Gateway

Indoor

Indoor &

ONLY

Outdoor

Regulatory Information

France

For 2,4 GHz, the product should not be used outdoors

in the band 2454 - 2483,5 MHz. There are no restrictions

when used in other parts of the 2,4 GHz band when used

indoors. Check http://www.arcep.fr/ for more details.

Pour la bande 2,4 GHz, l' équipement ne doit pas être utilisé

en extérieur dans la bande 2454 - 2483,5 MHz. Il n'y a pas de

restrictions pour des utilisations en intérieur dans d'autres

parties de la bande 2,4GHz. Consultez http://www.arcep.fr/

pour de plus amples détails.

Applicable Power Levels in France

Frequency

Location

Range (MHz)

Indoor

2400-2483.5

(No restrictions)

2400-2454

Outdoor

2454-2483.5

Italy

This product meets the National Radio Interface and

the requirements specified in the National Frequency

Allocation Table for Italy. Unless this 2,4-GHz wireless LAN

product is operating within the boundaries of the owner's

property, its use requires a "general authorization". Please

check http://www.comunicazioni.it/it/ for more details.

Questo prodotto è conforme alla specifiche di Interfaccia

Radio Nazionali e rispetta il Piano Nazionale di ripartizione

delle frequenze in Italia. Se non viene installato all'interno

del proprio fondo, l'utilizzo di prodotti Wireless LAN a

2,4 GHz richiede una "Autorizzazione Generale". Consultare

http://www.comunicazioni.it/it/ per maggiori dettagli.

Latvia

The outdoor usage of the 2,4 GHz band requires an

authorization from the Electronic Communications Office.

Please check http://www.esd.lv for more details.

2,4 GHz frekveču joslas izmantošanai ārpus telpām

nepieciešama atļauja no Elektronisko sakaru direkcijas.

Vairāk informācijas: http://www.esd.lv.

Notes:

Although Norway, Switzerland and Liechtenstein are

not EU member states, the EU Directive 1999/5/EC has

also been implemented in those countries.

The regulatory limits for maximum output power are

specified in EIRP. The EIRP level of a device can be

calculated by adding the gain of the antenna used

(specified in dBi) to the output power available at the

connector (specified in dBm).

Power (EIRP)

100 mW (20 dBm)

10 mW (10 dBm)