Cisco Physical Access CIAC-GW-K9 Installeren en configureren - Pagina 2
Blader online of download pdf Installeren en configureren voor {categorie_naam} Cisco Physical Access CIAC-GW-K9. Cisco Physical Access CIAC-GW-K9 26 pagina's. Physical access gateway
Ook voor Cisco Physical Access CIAC-GW-K9: Snelstarthandleiding (17 pagina's)
Chapter 2
Installing and Configuring the Cisco Physical Access Gateway
Overview
Overview
The Cisco Physical Access Gateway
(Figure
2-1) is installed near each door to provide access control
and connections for card readers, door locks and other input and output devices. The Gateway is
connected to the Cisco Physical Access Manager using an Ethernet connection to the IP network. Power
is supplied through a Power over Ethernet (PoE) connection, or using a DC power source. Each Gateway
includes connections for up to two Wiegand door readers, three input devices, and three output devices.
Optional expansion modules are available to add additional doors and devices to the Gateway.
Figure 2-1
Cisco Physical Access Gateway
Cisco Physical Access Gateway User Guide
2-2
OL-32499-01