Epson Perfection V700 Series Gebruikershandleiding - Pagina 7

4. Place the film holder on the document table so that it is

aligned with the upper right corner and the pins are seated

in the holes on the scanner.

5. Make sure you removed the document mat. See "Removing

the Document Mat" on page 4.

6. Close the scanner cover.

Note: You cannot use Full Auto Mode to scan 4 × 5 inch film.

When you are finished scanning film, be sure to replace the

document mat before scanning documents or photos. See

"Replacing the Document Mat" on page 9.

Placing Slides in the Holder

You can scan up to twelve 35mm slides at a time using the slide

holder.

Epson Perfection V700 Photo/V750 Pro

Note: Make sure the white stickers on the back on the film holder

and the areas around them are not scratched, dusty, or covered in

any way. If the areas are obscured, the scanner may have trouble

recognizing your slides in Full Auto Mode. Do not cover any of the

tiny holes in the film holder or the scanner may have trouble

recognizing which film holder you are using.

1. Place up to twelve slides in the 35mm slide holder with the

shiny base side facing down. Your image should appear

backwards on the side that faces up, as shown by the

illustration on the film holder. The top of your images

should face the open end of the film holder as shown below.

2. Place the film holder on the document table so that it is

aligned with the upper right corner and the pins are seated

in the holes of the scanner.

3. Make sure you removed the document mat. See "Removing

the Document Mat" on page 4.

4. Close the scanner cover.

When you are finished scanning slides, be sure to replace the

document mat before scanning documents or photos. See

"Replacing the Document Mat" on page 9.

12/05

Epson Perfection V700 Photo/V750 Pro - 7