Epson Perfection V750 Series Gebruikershandleiding - Pagina 6

Epson Perfection V700 Photo/V750 Pro

the side that faces up, as shown by the illustration on the

film holder. Make sure the entire image frame is positioned

in the film holder opening.

Note: Hold the edge of the film gently or use gloves to touch the

film; otherwise you may damage the film. Make sure the white

stickers on the back of the film holder and the areas around them

are not scratched, dusty, or covered in any way. If the areas are

obscured, the scanner may have trouble recognizing your film in

Full Auto Mode. Do not cover any of the tiny holes in the film

holder or the scanner may have trouble recognizing which film

holder you are using.

3. Close the cover over the film and press it down until it

clicks. Then press down on all the edges of the cover to

secure it.

4. Place the film holder on the document table so that it is

aligned with the upper right corner and the pins are seated

in the holes on the scanner.

5. Make sure you removed the document mat. See "Removing

the Document Mat" on page 4.

6 - Epson Perfection V700 Photo/V750 Pro

6. Close the scanner cover.

Note: You cannot use Full Auto Mode to scan medium format film.

When you are finished scanning film, be sure to replace the

document mat before scanning documents or photos. See

"Replacing the Document Mat" on page 9.

Placing 4 × 5 inch Film

1. Open the covers on the 4 × 5 inch film holder.

2. Place the film into the film holder with the shiny base side

facing down. Your images and any wording on the film

should appear backwards on the side that faces up, as shown

by the illustration on the film holder. Make sure the entire

image frame is positioned in the film holder opening.