Epson Series Perfection 1240U Series Product ondersteunings bulletin - Pagina 28

Blader online of download pdf Product ondersteunings bulletin voor {categorie_naam} Epson Series Perfection 1240U Series. Epson Series Perfection 1240U Series 40 pagina's. Product support bulletin(s)
Ook voor Epson Series Perfection 1240U Series: Gebruikershandleiding (7 pagina's), Opstarthandleiding (48 pagina's), Handleiding productinformatie (7 pagina's), Brochure (2 pagina's), Product ondersteunings bulletin (23 pagina's), Handmatig (11 pagina's), Product ondersteunings bulletin (17 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (24 pagina's), Product ondersteunings bulletin (29 pagina's), Product ondersteunings bulletin (8 pagina's), Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (11 pagina's), Product ondersteunings bulletin (14 pagina's), Product ondersteunings bulletin (18 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (40 pagina's), Product ondersteunings bulletin (11 pagina's), Conformiteitsverklaring (2 pagina's), Product ondersteunings bulletin (40 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (12 pagina's), Product ondersteunings bulletin (21 pagina's), Product ondersteunings bulletin (12 pagina's)

Pagina afdrukken
Epson Series Perfection 1240U Series Product ondersteunings bulletin
Clicking on "Refresh List" brings up this Warning window again.
Solution:
Download the patch from Epson's Support Web site at http://support.epson.com. The Installer should find the location of
your Epson Smart Panel software and install the update automatically.
Run Setup.exe and the Install wizard will find the location of Epson Smart Panel software on your hard drive and prompt
you to continue. Click "Next." The Install wizard will then finish. Click "Finish" to complete the update and exit.
To verify the patch was successful, open Epson Smart Panel and click on the Light bulb icon in the upper left-hand
corner. Select "About" from the pull-down menu. You should see v.2.01P01E (see figure below).
Start the Scan to Email Utility and run through the steps again. You will now find that your Email Program shows up as a
registered application in the Launch Assistant window (see figure below).
After you select your Email Program, it will open with a "Compose New" window and your scanned file will be attached
to the Email. Enter an email address, a subject line, and some text in the body of the mail, and then click "Send".