Digiwave ANT-5010 Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Digiwave ANT-5010. Digiwave ANT-5010 2 pagina's. Digital outdoor tv antenna passive version

Pagina afdrukken

(Fig.3)

Using the pole mounting accessories to fix the antenna on the balcony.

Outside

75Ω cable

Inside

(Fig.4) connect the "F" male connector of the coaxial cable to the "F" female connector of the antenna, and wear

the water-proof cap to the end of the connected "F" connector.

Fig.4

Installation: Please take following (Fig.5) and (Fig.6) installation instruction for the reference.

set-top box

Installation 1: Directly connected to TV(Fig.5)

Installation 2: Connected Through set-top-box (Fig.6)

Note: After the antenna mounting and installation is finished,

please adjust the antenna in the best position that can get clear TV

picture, then fix the antenna,organize the coaxial cable for neat, tidy and safety,

Please take reference of following positioning way to adjust the antenna position.

(Fig.8) through the fixing screws to adjust the antenna position in left or right direction

(Fig.9)through turning the antenna body to adjust the antenna position in left or right direction

Turning left/right 45

Fig.8

Fig.9

Operation Instruction:

Note:For the best reception,Please check the following conditions

1. Keep the antenna away from the sources of interference: keep the

antenna away from those big power consumption devices,such as air

conditioner,elevator,hair dryer and microwave oven...ect.

2. Place the antenna near windows when use the antenna in indoor

environment.

3. Install the antenna as high as possible: in digital terrestrital

reception,if there are some interceptions between antenna and

please face the antenna to the TV signal

transmission tower,it will cause the signal loss temporary. So if the

transmitter tower direction

antenna is installed as possible, those interceptions will be reduced.

Technical Support: [email protected]; www.digiwave.ca