Epson Stylus Photo RX600 Start hier Handleiding - Pagina 6

Blader online of download pdf Start hier Handleiding voor {categorie_naam} Epson Stylus Photo RX600. Epson Stylus Photo RX600 10 pagina's. Product support bulletin(s)
Ook voor Epson Stylus Photo RX600: Tips (2 pagina's), Productinformatieblad (4 pagina's), Productinformatie (19 pagina's), Brochure (2 pagina's), Installatiehandleiding (2 pagina's), Snelstarthandleiding (28 pagina's), Gebruikershandleiding (12 pagina's), Update (1 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (1 pagina's), Specificaties (2 pagina's), Kopiëren en afdrukken (20 pagina's), Instructiehandleiding (4 pagina's)

Pagina afdrukken

Epson Stylus Photo RX600 Start hier Handleiding

Install Software and

Connect to Your Computer

The software works with Windows

OS 9 and OS X 10.2 and later.

Windows

Make sure the RX600 is not

connected to your computer.

Then turn on your computer.

Note: If your RX600 is turned on

and connected, you may see

several New Hardware screens.

Click Cancel on each of these

screens and disconnect the RX600.

You can't install your software

that way.

Insert the Epson CD-ROM in your CD-ROM

or DVD drive.

Note: If you're using Windows XP and you

see a message asking what to do with your

CD, click Cancel.

When you see this screen, click Install:

If this screen doesn't appear,

do the following:

Windows XP: Click Start >

My Computer. Then double-click

the EPSON CD-ROM icon.

For Windows 98/Me/2000:

Double-click My Computer.

Then double-click the EPSON

CD-ROM icon.

Read and agree to the license

agreement to continue.

You see this screen and the installer

begins copying several software

programs to your computer:

When you see this screen, connect

the USB cable extending from the

RX600 to any open USB port on your

computer. Several messages appear

on the screen. Wait for all the screens

to disappear.

Note: If the blue USB screen doesn't disappear, make sure the RX600

is turned on and securely connected to your computer. If you see a

message about a Hi-speed device plugged into a non-Hi-speed hub,

close the message screen.

When you see a message that you

have successfully installed the

RX600 drivers, click Next.

98SE, Me, 2000, and XP, and Macintosh

continue