Epson Stylus Photo RX700 Series Start hier Handleiding - Pagina 4
Blader online of download pdf Start hier Handleiding voor {categorie_naam} Epson Stylus Photo RX700 Series. Epson Stylus Photo RX700 Series 8 pagina's. Epson scan icm updater v1.20 (psb.2008.07.001)
Ook voor Epson Stylus Photo RX700 Series: Productinformatie (17 pagina's), Update (1 pagina's), Start Here (2 pagina's)
Pagina afdrukken
3
Slide the edge guide against the left side of the paper.
4
Extend the output tray.
Note: See your Basics book for instructions on loading paper in the rear
sheet feeder.
5
Install Software and
Connect to Your Computer
The software works with Windows
OS X 10.2.x to 10.3.x. Follow the steps below (for Windows), or the steps on
the back of this sheet (for Macintosh).
Windows
1
Make sure the RX700 is not connected to your computer, then turn on
your computer.
Note: If you see several New Hardware Wizard screens, click Cancel
for each of these screens and disconnect your RX700. You can't install
your software that way.
2
Insert your RX700 software CD-ROM in your CD-ROM or DVD drive.
Note: If you're using Windows XP and you see a message asking what
to do with your CD, click Cancel.
®
98SE, Me, 2000, and XP, and Macintosh
Turn over
®