Digiway P550F Gebruiksaanwijzing - Pagina 14

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Digiway P550F. Digiway P550F 16 pagina's. Sliding gate motor

9. Manual release

A: What to do during a power failure:

The gate can be manually pushed open and close if there is no power. To do this, you need to release

the release bolt.

(1) Open the front door and turn the switch (circuit breaker) OFF (even though there is no power)

(2) Fit spanner (provided) onto the manual release bolt nicely.

(3) Turn the spanner anti-clockwise 1 turn. Take the spanner off the manual release bolts. The

gate can now be manually opened and closed. DO NOT TURN THEBOLT MORE THAN

ONE TURN, OTHERWISE OIL COME OUT

(4) After the gate was pushed to the required position, fit the spanner onto the manual release

blots, clockwise turn and make the bolts tight, otherwise maybe cause oil leaking.

B: What to do if power is reconnected:

(1) Make sure the switch (circuit breaker) is still OFF.

(2) Fit the spanner onto the bolt nicely and clockwise turn the manual release blots and make sure

the bolt is tight

(3) Turn on the switch on, the gate should start to close if no signal input on PEB (safety) and

OPN (open) inputs

(4) When gate hit on receiving post, the controller will recall the all the settings and ready to

operate.

P750V5.0 industrial gate motor manual

MANUAL RELEASE