3Com OfficeConnect WX1200 Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} 3Com OfficeConnect WX1200. 3Com OfficeConnect WX1200 10 pagina's. Secure converged networks enterprise edition
Ook voor 3Com OfficeConnect WX1200: Snelstarthandleiding (2 pagina's), Snelstarthandleiding (10 pagina's), Gegevensblad (6 pagina's), Producthandleiding (15 pagina's)
Pagina afdrukken
This document describes how to do the following:
Use the quickstart command to perform basic
system configuration of a Wireless LAN switch (WX)
running Mobility System Software Version 3.0.
Configure a Mobility Domain for roaming.
Open the sample 3WXM network plan
3ComStarterExample, which contains the configura-
tion values used in the CLI examples. You can use the
network plan to build on the configuration, if you do
not want to continue to use the CLI.
What Does the quickstart Command Configure?
The quickstart command runs a script that interactively
helps you configure the following items:
System name
Country code (regulatory domain)
System IP address
Default route
Administrative users and passwords
System time and date parameters
Unencrypted (clear) SSID names
Part No. 730-9502-0048, Revision B
Published November 2004
W
LAN S
IRELESS
Q
S
UICK
TART
WITCH AND
G
UIDE
Usernames and passwords for guest access using
Web AAA
Encrypted (crypto) SSID names and dynamic WEP
encryption for encrypted SSIDs' wireless traffic
Usernames and passwords for secure access using
802.1X authentication using PEAP-MSCHAPv2 and
secure wireless data encryption using dynamic Wired
Equivalent Privacy (WEP)
Managed Access Points (MAPs) that are directly con-
nected to WX switches
Distributed MAPs, which are connected to WX
switches through an intermediate Layer 2 or Layer 3
network
The quickstart command displays a prompt for each of
these items, and lists the default if applicable. You can
advance to the next item, and accept the default if
applicable, by pressing Enter.
Depending on your input, the command also automati-
cally generates the following key pairs and self-signed
certificates:
SSH key pair (always generated)
Admin key pair and self-signed certificate (always
generated)
C
ONTROLLER