Epson C11C422001 - FX 880+ B/W Dot-matrix Printer Productinformatie - Pagina 13
Blader online of download pdf Productinformatie voor {categorie_naam} Epson C11C422001 - FX 880+ B/W Dot-matrix Printer. Epson C11C422001 - FX 880+ B/W Dot-matrix Printer 17 pagina's. Warranty statement
Ook voor Epson C11C422001 - FX 880+ B/W Dot-matrix Printer: Installatiehandleiding (10 pagina's), Specificatie (2 pagina's), Montagehandleiding (8 pagina's), Beperkte garantie (1 pagina's)
Pagina afdrukken
6. Hold the ribbon cartridge by its handle and push it firmly
down into position; then press down both ends of the
cartridge to fit the plastic hooks into the slots.
7. Use a pointed object, such as a ball point pen, to guide the
ribbon between the print head and ribbon guide while you
turn the ribbon-tightening knob to help feed the ribbon
into place.
8. Slide the print head from side to side to make sure it moves
smoothly.
9. Install the paper tension unit by placing it on the printer's
mounting pegs and lowering it into place. Press down both
ends of the unit until it clicks into place.
10. Replace the printer cover.
Clearing Paper Jams
1. Press the
Operate
2. Remove the printer cover.
3. If continuous paper is jammed in the printer, tear off the
fresh supply at the perforation nearest the paper entry slot.
4. Turn the knob on the left side of the printer away from you
to eject the paper in the printer.
Caution:
Always turn off the printer before you use the knob;
otherwise the printer may be damaged or the top-of-
form or tear-off position may be lost.
5. Remove any remaining pieces of paper. If the paper is stuck
where the printer ejects it, gently pull the paper out of the
printer.
6. Replace the printer cover and press the
turn on the printer. Make sure the
flashing and the
Pause
Using the Default-Setting Mode
The default settings control many printer functions. While
you can often set these functions through your software or
printer driver, you may sometimes need to change a default
setting from the printer's control panel using the default-
setting mode.
The following tables summarize the default-setting mode
settings and options. The factory settings are bold.
11/98
EPSON FX-880/FX-1180
button to turn off the printer.
Operate
Paper Out
light is off.
EPSON FX-880/FX-1180
button to
light is not
- 13