Epson C11C422001 - FX 880+ B/W Dot-matrix Printer Productinformatie - Pagina 2
Blader online of download pdf Productinformatie voor {categorie_naam} Epson C11C422001 - FX 880+ B/W Dot-matrix Printer. Epson C11C422001 - FX 880+ B/W Dot-matrix Printer 17 pagina's. Warranty statement
Ook voor Epson C11C422001 - FX 880+ B/W Dot-matrix Printer: Installatiehandleiding (10 pagina's), Specificatie (2 pagina's), Montagehandleiding (8 pagina's), Beperkte garantie (1 pagina's)
Pagina afdrukken
EPSON FX-880/FX-1180
Front paper guide (C814021 for FX-880, C814031 for
FX-1180)
Allows you to load single sheets and carbonless single-
sheet multi-part forms of up to 6 parts without removing
the tractor from the front push position.
Optional Interface Cards
You can install one of the following EPSON interface cards in
your printer.
Card Type
Serial interface
32KB intelligent serial interface
Coax interface
Twinax interface
Type B bidirectional parallel
Multi-protocol Ethernet print server
Printer Specifications
Mechanical
Printing method: 9-pin impact dot matrix
Printing speed:
High speed draft: 410 cps at 10 cpi (max.
455 cps at 12 cpi)
Draft: 310 cps at 10 cpi
Near letter quality: 77 cps at 10 cpi
Printing
Bidirectional logic seeking for text and
direction:
graphics printing. Unidirectional text or
graphics printing can be selected using
software commands.
Line spacing:
1/6-inch or programmable in 1/216-inch
increments
Printable
FX-880:
columns:
FX-1180: 136 columns (at 10 cpi)
Resolution:
Maximum 240
quality)
Interfaces:
One standard bidirectional, 8-bit, parallel
interface with IEEE 1284 nibble mode
support and one optional interface slot.
2 - EPSON FX-880/FX-1180
Model Number
C823051
C823071
C823141
C823151
C823452
C823572
80 columns (at 10 cpi)
144 dpi (near letter
Paper feed
Friction (front, rear)
methods:
Push tractor (front, rear)
Pull tractor (front, bottom, rear)
Push and pull tractor (additional tractor is
required)
Cut-sheet feeder (optional)
Roll paper holder (optional)
Paper feed speed: Continuous: 5 inches/second
Intermittent: 62 ms/line at 1/6-inch line
spacing
Paper capacity:
Single-bin cut-sheet feeder holds up to
50 sheets of 22 lb (82 g/m
Note:
The total thickness of the paper stack can be up
to 0.20 inch (5 mm).
High-capacity cut-sheet feeder:
Note:
The total thickness of the paper stack can be up
to 0.59 inch (15 mm).
Buffer:
32KB or 0KB (selectable in the default-
setting mode or the EPSON Remote!
utility)
Built-in fonts:
Bitmap fonts:
EPSON Draft
EPSON Roman
EPSON Sans Serif 10, 12, 15 cpi,
Barcode fonts:
EAN-13, EAN-8, Interleaved 2 of 5,
UPC-A, UPC-E, Code 39, Code 128,
POSTNET
Character tables: One Italic and 10 graphical character tables.
(Nineteen graphical character tables are
available in some countries.)
Character sets:
13 international character sets
11/98
2
) paper
up to 150 sheets of 22 lb (82 g/m
up to 25 plain or bond envelopes
up to 30 airmail envelopes
10, 12, 15 cpi
10, 12, 15 cpi,
proportional
proportional
) paper
2