Acuity Brands Lighting GR804A Installatie- en onderhoudshandleiding - Pagina 3

Blader online of download pdf Installatie- en onderhoudshandleiding voor {categorie_naam} Acuity Brands Lighting GR804A. Acuity Brands Lighting GR804A 5 pagina's.

Pagina afdrukken

HOLOPHANE

AFTER INSTALLATION DELIVER THIS MANUAL TO OWNER

1 INTRODUCTION

1.1 Product Description.

•

The fixture line is designed to operate LED light sources up to

115 watts.

•

This fixture must be serviced by trained electrical personnel.

•

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

1.2 Alternate Information Sources.

Holophane

Field Service Department

P.O. Box 3004

Newark, OH 43058-3004

(740) 349-4182

Pedestrian LED

Luminaire Series

ESPLANADE®

MEMPHIS

2 INSTALLATION

2.1 Tools and Materials Required.

TABLE 1. Installation Tools and Materials

DESCRIPTION

Flat blade screwdriver

Pendant Mount:

3/16" Allen wrench

Pipe Thread Sealant

3/8" Socket

Stem Mount:

1/8" Allen wrench

3/16" Allen wrench

1/4" Allen wrench

9/16" Socket

3/8" Socket

2.2 Fixture Installation.

2.2.1

Remove the mounting assembly from the electrical

housing by loosening the closure screw or latch and then swinging

the mounting assembly open on the mounting assembly hinge until

the hinge disengages. Disconnect the electrical connector from

the mounting assembly. See Figure 1.

2.2.2

Loosen the wire chamber cover screws and remove the

wiring chamber cover. Allow it to hang by the electrical wires

attached to the terminal block. See Figure 1.

Installation and

Maintenance

Manual

GR395, GR804A

USE

Terminal block connections

Setscrew

Mounting pipe threads

Closure screw (Esplanade only)

Setscrew

Nuts

Screws

IM-350