Epson DLQ-3500 Beknopte handleiding - Pagina 22

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Epson DLQ-3500. Epson DLQ-3500 32 pagina's. Epson serial impact dot matrix printers
Ook voor Epson DLQ-3500: Installatiehandleiding (31 pagina's), Kennisgeving (1 pagina's), Referentiehandleiding (34 pagina's)

Pagina afdrukken

To tear off and eject labels

Always tear off and eject labels as described

below.

Caution:

Never feed labels backward using the

Load/Eject button, Tear Off/Special

Paper button, or knob on the right side

of the printer. Labels can easily peel off

their backing and jam the printer.

1. At the back of your printer, tear off the

last label form that has entered the

printer, but do not press the Tear

Off/Special Paper button. See the

illustration below.

2. Press the LF/FF button to eject the last

label form forward.

Caution:

Do not leave labels loaded in the printer

between print jobs; they tend to curl and

may come off their backing sheet and jam

the printer when you resume printing.

EPSON DLQ-3500 Quick Guide

Continuous forms with labels

The continuous forms with labels is a type of

continuous paper with one label on each

page. This is different from label paper,

which consists entirely of labels. When

printing on this type of paper, the printer

must adjust the height of the print head for

the extra thickness of the labels.

Follow these steps to load continuous forms

with labels:

Caution:

Use continuous forms with labels only

under normal operating conditions.

1. Make sure of the following:

❏ Your software settings keep the

printing entirely within the

printable area. See "Printable area"

in the Reference Guide for more

information.

❏ Tractor is selected as the paper

source on the control panel.

2. Turn on Overlapping Forms and Skip

over perforation settings in the

default-setting mode.

Note:

When Overlapping Forms is turned on in

the default-setting mode, the printer

automatically activates the auto paper

thickness function even though the

paper-thickness lever may be set to another

position.

Special Papers (3/6)