Acuity Brands Lighting IS Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} Acuity Brands Lighting IS. Acuity Brands Lighting IS 18 pagina's.

Installation Instructions

RSX LED

4. The luminaire is supplied with a variety of slots to

align with existing pole mounting drill patterns. The top

hole of the luminaire arm has a key hole slot.

Place the luminaire onto the top bolt by passing the

head through the key slot and resting the luminaire

down securely in place (See Fig 3).

WARNING: THE LUMINAIRE IS NOT COMPLETELY

LOCKED DOWN YET. SPECIAL CARE MUST BE TAKEN TO

AVOID JARRING THE LUMINAIRE FROM ITS RESTING

POINT

Ensure the luminaire is resting securely on the top bolt

and snug the bolt but do not completely tighten yet.

Thread the second bolt through the arm slot and into

the available threaded hole of the mounting bar (See

Fig 4).

5. The luminaire is supplied with a clearance slot in the

back to allow wires to be pulled into the pole on exist-

ing hole patterns. Insert the wires through the clear-

ance slot shown in Figure 5 and pull them into the pole.

6. Ensure luminaire is straight/level making sure that

no wires are pinched, tighten the two bolts with a 3/8

socket to 20-30ft-lbs (overtightening can damage com-

ponents and void warranties). Make sure that wires are

not pinched and tuck excess wire up into the luminaire

mounting area.

7. Reinstall the cover removed in step 1, tighten the two

captive screws with the 9/64 Allen wrench to 18-20 in-

lbs (overtightening can cause thread stripping and void

all warranties) (See Fig 6).

8. Make wire connections in the pole, observing proper

voltage and polarity. Connect green ground wire from

the fixture to the field ground wire. Secure wires; push

back into pole and replace pole cap.

Lithonia Lighting Outdoor

One Lithonia Way, Conyers, GA 30012

Phone: 800-279-8041 Fax: 770-918-1209

www.lithonia.com

Part Number: IM-459 Rev A

Revision Date: 8/29/19

Page #3