Epson FX 890 Gebruikershandleiding - Pagina 31

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson FX 890. Epson FX 890 48 pagina's. Epson fx-2190: product information
Ook voor Epson FX 890: Specificatieblad (1 pagina's), Specificaties (2 pagina's), Handmatig (11 pagina's), Installatiehandleiding (2 pagina's), Handleiding productinformatie (19 pagina's), Snelle referentie (12 pagina's), Specificaties (2 pagina's)

Using the Micro Adjust Function

The Micro Adjust function allows you to move the paper forward or

backward in 1/216-inch (0.118 mm) increments to adjust the tear-off and

top-of-form positions.

If your paper's perforation is not aligned with the tear-off edge, you can

use the Micro Adjust function to move the perforation to the tear-off

position, as described below. Your tear-off position setting remains in

effect until you change it, even if you turn off the printer.

Caution:

Never use the knob to adjust the tear-off position; this may damage the

printer or cause it to lose the tear-off position.

You may need to press

the Tear Off/Bin button to

advance the paper to the

tear-off position. Make

sure the Tear Off/Bin

light is flashing (the paper

is at the current tear-off

position).

Hold down the Pause

button for about three

seconds. The Pause light

begins flashing and the

printer enters the Micro Adjust mode.

Paper Handling