Epson FX-2190 Gebruikershandleiding - Pagina 33

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson FX-2190. Epson FX-2190 48 pagina's. Impact printers
Ook voor Epson FX-2190: Specificaties (2 pagina's), Handmatig (11 pagina's), Installatiehandleiding (2 pagina's), Handleiding productinformatie (19 pagina's), Specificaties (2 pagina's), Snelle referentie (12 pagina's), Start Here (2 pagina's)

Make sure the printer is turned on.

Load paper. (If the tractor is in a push position, press the Load/Eject

button to advance continuous paper to the current top-of-form

position.) If necessary, lift up the printer cover so you can see the

paper position.

Hold down the Pause button for three seconds. The Pause light

flashes and the printer enters the Micro Adjust mode.

Press the LF/FF D

button to move

the top-of-form

position up on the

page, or press the

Load/Eject

button to move

the top-of-form

position down on

the page.

Press the Pause button to exit the Micro Adjust mode.

Note:

❏

The printer has a minimum and a maximum top-of-form position. If

you try to adjust it beyond these limits, the printer beeps and stops

moving the paper.

❏

When the paper reaches the default top-of-form position, the printer

beeps and stops moving the paper briefly. You can use this setting as a

reference point when adjusting the position.

❏

The top margin setting made in some software overrides the top-of-form

position setting you make with the Micro Adjust function.

Paper Handling