Epson FX-870 Specificaties - Pagina 6
Blader online of download pdf Specificaties voor {categorie_naam} Epson FX-870. Epson FX-870 12 pagina's. Commonly asked questions and answers
Ook voor Epson FX-870: Product ondersteunings bulletin (20 pagina's), Product ondersteunings bulletin (5 pagina's), Montagehandleiding (8 pagina's), Product ondersteunings bulletin (16 pagina's), Product ondersteunings bulletin (8 pagina's)
Pagina afdrukken
FX-870/1170
Symbol set
Characters defined in the following symbol set can be printed
using the ESC \ (characters) or ESC * (one character)
software command.
Control Panel
The control panel has four buttons and three lights for simple
control of basic printer operations.
Lights
READY
(green)
On when the OPERATE
button is on and power is supplied.
This light blinks when the printer is paused, in tear-off mode,
out of paper, or the print head is overheated.
FONT
(green)
Shows which font is selected. This light is off for draft, on for
CONDENSED
(green)
On for condensed printing and off for normal printing.
Buttons
OPERATE
Turns the printer on or off. The printer is off when the button
is out and on when the button is in.
PAUSE/TEAR OFF
Press this button to stop printing temporarily. Press it again
to resume printing.
FX-870/1170-6
READY
OPERATE
10/13/92
When you have finished printing on continuous paper, press
this button once to advance paper to the tear-off position.
Press it again to feed the paper backward to the loading
position.
PAPER FEED
Press this button briefly to advance paper line by line. Hold it
down to advance continuous paper to the next top-of-form
(TOF) position.
When the printer is out of paper, press this button to load
continuous paper from the paper-park position or a single
sheet from the optional cut-sheet feeder.
FONT
Press this button to select a font (draft, Epson Roman, or
Epson Sans Serif). This button also selects the normal or
condensed mode for these fonts.
ALT
The FONT
button also functions as the
down while pressing another button for the following
functions:
and press
If the paper-release lever is in
paper is ejected. If the paper-release lever is in the
rear-tractor position, paper moves back to the paper-park
position.
when paper is already loaded in the
printer.)
Micro feed allows you to move the paper forward or
backward in 2/216-inch increments to adjust the loading
and tear-off positions.
when the
printer is out of paper.)
When you use the optional double-bin cut-sheet feeder, you
can select the bin before loading paper.
Other control-panel features
Default setting mode:
Hold down
Self test:
you turn on the printer to perform the
self test. The self test lets you see that
your printer is operating properly and
provides a printout of the current default
settings.
Hold down
Data dump:
dump
users to find the cause of communication
problems between the printer and the
computer.
ALT
button. Hold it
PAPER FEED.)
the
single-sheet position,
and press
PAUSE/TEAR OFF
and press
the PAPER FEED
button while
the PAUSE
button while you
mode.
This mode allows advanced
9-Pin Printers
front-
or