TomTom 9821 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} TomTom 9821. TomTom 9821 11 pagina's. Wireless bluetooth bt gps receiver

Turn off

4.3 Charging

Low Power

Charging

Waiting to connect

Connected

Navigating

The PIN code means Personal Identification Number for Bluetooth device and it is also

called as Pass Key. The Bluetooth GPS receiver has the default PIN Code, and is "0000". Generally

speaking, there are two steps in Bluetooth connecting. One is pairing process, the other is link process.

If you need PIN code to pairing and connect, you can use the default pin code, "0000" to connect

Bluetooth device. Our GPS receiver belongs to non-safety connecting, you can use in general

application to finish connecting.

To turn off the receiver, press the power button on the topside for

3 seconds. The LED indicator will flash briefly before switching

off the receiver. Note: When the receiver is in the cradle, the

receiver will switch off if the power to the cradle is interrupted or

switched off (to synchronize with vehicle ignition).

The left LED(LED 1) indicator will turn RED (normally BLUE)

when battery power becomes low. Connect the receiver to a

powers source to continue operation and to recharge the battery.

The right LED(LED 2) indicator will turn RED (or ORANGE)

when the battery is being charged. When fully charged, the RED

indicator will switch off.

The left LED(LED 1) indicator will flash if there is no

communication between the receiver and another device.

The left LED(LED 1) indicator will turn to continuous lighting

when the receiver is connected through the wireless link with

another device.

The right LED will flash GREEN (or ORANGE when charging) if

the receiver is able to determine the current position.

- -