TomTom HP edition Gebruikershandleiding - Pagina 30

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} TomTom HP edition. TomTom HP edition 42 pagina's. Tomtom navigator hp edition gps-software: user guide

Pagina afdrukken

An icon which shows, when circling, if your GPS device is well connected and it receives data

The schematic representation of the sky showing the positions of the satellites

Measuring bars for the signal strength of each visual satellite, locked satellites are shown in blue

Configure GPS

Use

and

to browse through the list of supported GPS devices until your GPS device is shown.

Specify your GPS device by selecting DONE.

Note:

When you select "Other Cable NMEA GPS" as your GPS device you might need to specify a baud rate.

Refer to your NMEA GPS receiver manual to find out the used baud rate. For many devices this will be

4800 baud.

4.9. Switch map

Switch to the map of another country or area by tapping Switch map

This option allows you to select a map from a list of available maps. Certain maps come pre-installed on

your SD card, others can be installed using your CD-ROM.

The map that you are currently using is highlighted yellow.

If only one map is available, it is selected automatically.

4.10. Enable/Disable POI

Specify which POI categories can be shown on maps by tapping Enable/Disable POI

Both the

main screen

There are many POI categories available, each represented by its own icon. The "Enable/Disable POI"

preference lets you specify which particular categories can be shown on the map.

You will be offered a

before those POI categories that you wish to be shown on maps.

and the

map browser

browser

listing of all the available POI categories. Place a checkmark in the boxes

"set units " preference

"set units" preference

map installation

are capable of displaying points of interest (POI) on the map.

option.

description.