TomTom Navigator Navigator 3 Snelstarthandleiding - Pagina 28

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} TomTom Navigator Navigator 3. TomTom Navigator Navigator 3 44 pagina's. Wireless gps receiver
Ook voor TomTom Navigator Navigator 3: Gebruikershandleiding (47 pagina's), Gebruikershandleiding (14 pagina's), Gebruikershandleiding (12 pagina's)

Pagina afdrukken

Change the order of drive-bys. Select a drive-by in the list and select the

down or up arrow to move the drive-by down or up in the itinerary.

Remove drive-by or destination from the itinerary.

Using an itinerary to plan or navigate routes

Selecting the button Plan will plan the route to the first active destination in the itinerary. First you will be prompted to

select from where you want to plan; the last known GPS position, the last destination or the centre of the map.

The button Navigate will also plan to the first active destination of the itinerary and will start guidance from the current

GPS location. If no GPS is available you will be asked to select the departure location. As you pass drive-bys and

destinations, these locations will be disabled in the itinerary. To skip the current destination on the itinerary and navigate

to the next, select Itinerary Destination from the Navigate to menu.

The button Done will close the Itinerary View and show Map View.

Itinerary popup menu

Tap and hold the itinerary list to access the itinerary popup menu. At the bottom of the screen is the Menu bar.

Edit/move

Disable/Enable

Delete

New

Save

Load...

Enable all

Plan cross-border itinerary

You can compose an itinerary containing drive-bys and destinations from multiple maps. This enables you to plan a

complex itinerary crossing map borders. To compose a cross-border itinerary, load a map and add locations to the

itinerary. Tap

on the menu bar, or select Add to itinerary from the pop-up menu in Map view, to add a location to

the itinerary.

Then load another map and add locations from the second map. The drive-bys and destinations that were added on the

previously loaded map are displayed as grey strikethrough text.

Selecting buttons Plan or Navigate, will result in a route to the first enabled destination on the current map. You can use

all TomTom Navigator maps, including the Major Roads map.

5. The Properties

Change the name of the itinerary location, and its position in the

itinerary.

Disables the selected location as part of the itinerary. In the itinerary

list the name will be greyed. When planning or navigating the itinerary

the location will be ignored. Select again to enable the location.

Remove drive-by or destination from the itinerary.

Clear the current itinerary to create a new one.

Save the current itinerary.

Load a previously saved itinerary.

Enable all locations in the itinerary.