TomTom RDS-TMC Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} TomTom RDS-TMC. TomTom RDS-TMC 13 pagina's. Traffic receiver

RDS-TMC Receiver Guide

This guide explains how to install and use the TomTom RDS-TMC

Traffic Receiver.

The RDS-TMC Traffic Receiver provides the latest traffic reports to

help you improve travel planning and reduce journey times.

You can either receive traffic information from TomTom Traffic using

a wireless data connection or RDS-TMC information using the RDS-

TMC Traffic Receiver. You cannot use both services at once.

Note: If radio reception is poor, for example when you are driving

through a mountain valley, RDS- TMC reception will also be affected.

Important: When you install your navigation device in your car, don't

block the driver's view of the road.

1. Connect the RDS-TMC Traffic Receiver to your navigation device.

2. Connect the Car Charger to the RDS-TMC Traffic Receiver and

then plug the Car Charger into your car's cigarette lighter socket.

Note: The RDS-TMC receiver does not work

connected.

3. Place the transparent suction cup at the tip of the antenna firmly

against the upper left of your car windscreen.

4. Then place the remaining suction cups along the edge of the

windscreen, as shown, and keep the cable straight.

5. Switch on your navigation device.

The Traffic bar is shown in the Driving View and your navigation

device searches for a radio station that carries RDS-TMC

information.

the Car Charger is not

(c=J)

(