Epson LQ-1070+ Handleiding productinformatie - Pagina 4
Blader online of download pdf Handleiding productinformatie voor {categorie_naam} Epson LQ-1070+. Epson LQ-1070+ 8 pagina's. Product support bulletin(s)
Ook voor Epson LQ-1070+: Product ondersteunings bulletin (20 pagina's), Product ondersteunings bulletin (5 pagina's), Handleiding productinformatie (8 pagina's), Installatiehandleiding (1 pagina's), Product ondersteunings bulletin (16 pagina's)
Pagina afdrukken
LQ-1070+
Table 2 DIP switch 2
SW
Page length (for continuous
2-1
2-2
Tear off
2-3
2-4
Auto line feed
Table 3 International character sets
Sweden
Spain 1
Table 4 Character tables
Character table
PC 437 (Unrted States)
PC 850 (Multilingual)
PC 860 (Portugal)
PC 863 (Canada-French)
PC 865 (Norway)
Table 5 Page length
6.5 inches (216 mm)
.
11 inches (279 mm)
11.7 inches (296 mm)
12 inches 1305 mm)
DIP-switch functions
This section descriies all of the functions you can select with the DIP
switches.
International character sets
You can change 12 characters in the italic character table to suit your
printing needs. Since these characters are often used in other
languages, they are named after countries and referred to as
international character sets.
Select the international character set with DIP switches l-2,1-3, and
l-4, according to DIP-switch Table 3.
The character sets you can select by DIP switch are USA, France,
Germany, United Kingdom, Denmark I, Sweden, Italy, and Spain I.
However, you can also select the following sets with the ESC R
software command: Japan (English), Norway, Denmark II, Spain II,
Latin America, Korea, and Legal.
Note: If you send the ESC t 0 command (to select italics) while DIP
switch l-4 is on, the international character set is always USA.
Lq-1070+ - 4
ON
See Table 5 below
Off
On
On
Off
off
On
off
Off
off
On
Off
Off
off
l - l
Set international character sets
according to Table 3 above
On
On
On
On
On
Off
On
Off
On
On
Off
Off
Off
On
On
I Off
Off
On
On
International character sets
Country
0 USA
1 France
2 Germany
3 United Kingdun
4 Dermark I
7 Sparn I
The following eight additional
ESC R software command.
Off
Off
Additional international character sets
Off
Country
Japan
Q Norway
Off
10 Denmark II
11 Sparn II
On
12 Latin America
On
13 Korea
On
64 Legal
On
On
Character tables
Your printer has six character tables built-in five graphics character
tables and one italics character table.
I On
You can select the character tables with DIP switches l-2,1-3, and
Off
1-4, according to Table 4.
On
To select a graphics character table, you must first turn DIP switch
Off
Note: If you send the ESC t 1 comman d (to select graphics) while
DIP switch 1-Q is off, the graphics character table is always PC 437
(United States).
Print direction
Printing is normally bidirectional. However, turning DIP switch 1-5
on for unidirectional printing-in which the print head
direction only-allows for precise vertical printing alignment. This
makes it ideal for printing graphics such as lines or boxes.
If DIP switch l-5 is on, printing is unidirectional even if you select
bidirectional with the ESC U 0 software command.
7/20/93
ASCII code (hex)
23 24 40 56 5C SD SE 60 78 7C 70 7E l-l 1-2 l-3 t-4
I
6 Bb
l
\
e
e
are available only by using the
sets
ASCII code (hex)
23 24 40 56 5C 5D SE 60 76 7C 70 7E
$
off
off
A)
A
6
ii
24-Pin Printers