DIHL WF-32BDSS Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DIHL WF-32BDSS. DIHL WF-32BDSS 9 pagina's. Wine refrigerator

Care And Maintenance

Cleaning your wine refrigerator
Unplug the wine refrigerator and remove the bottles.
Wash the inside with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
The outside of the wine refrigerator should be cleaned with mild detergent and warm water.
Draw out the water box at the bottom, and wash.
Moving your wine refrigerator
Remove all the bottles.
Securely tape down all loose items inside your wine refrigerator.
Turn the leveling legs up to the base to avoid damage.
Tape the door.
Be sure the wine refrigerator stays in the upright position during transportation.

Problems Disposal

You can solve many common wine refrigerator problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling service center.
PROBLEM
Wine refrigerator does not operate.
Wine refrigerator is not cold enough.
The light does not work.
Vibrations.
The wine refrigerator seems to make
too much noise
The door will not close properly.
LED could not display.
LED display error.
Bottoms are not functional.
POSSIBLE CAUSE
Not plugged in using different voltage. The circuit
breaker tripped or a blown fuse.
Check the temperature control setting.
External environment may require a higher setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The wine refrigerator does not have the correct
clearance.
The bulb may have blown.
Check to assure that the wine refrigerator is level.
The wine refrigerator is not level.
Check the fan for dirt/debris.
The wine refrigerator is not level.
The doors were reversed and not properly installed.
The seal is weak.
The shelves are out of position.
Main control board does not work.
PCB Problem.
There is some problem with the plug.
Weak quality of display.
Temperature point is off.
Temperature controller panel is damaged.